Intrinsically Safe
T5x is an industrial control instrument explicitly designed for explosive and flammable operations. It converts the weight values to 4-20mA output, 0-10V output, or RS485 communication output. There are two ways of calibration: weight calibration and mV/V calibration. This product can be used for filling, weighing, weighing hopper systems, mixing systems, belt weighing systems, or other industrial control applications. Explosive standard: ExibIIT4Gb
Features
• Power source: 9.6V batteries
• Single load cell input
• Suitable for use with any resistive strain gage load cells
• On site installation, dustproof, waterproof
• Analog output: 4-20 mA or 0-10V
• RS485 serial communication output
• Can be connected to up to 4 load cells
• 6-digit LCD
• mV/V calibration
• Weight calibration
• Stable weight annunciator
• Digital filter, manual zero range selection
• Automatic zero tracking
• Power-on zero, configurable to ±10% of full scale
• Multiple weighing odes: net/gross, accumulator, piece count, lock mode
• Multiple weight lock modes: automatic, manual, peak-hold
• Low battery detection, Auto shut off
Load Cell Excitation: | 3.3 VDC | Power consumption: | Less than 2W |
Load Cell Current: | Drives up to four 350 Ω Load Cells | A/D Conversion Rate: | 0Hz or 80Hz, selectable |
Battery power supply input: | 9.6V battery module, 3600 mAh | Non-linearity: | Less than 0.02% F.S |
Minimum input sensitivity: | 0.3μV/grad | Display: | 6-digit LCD |
Max Input current: | 140ma | Input impedance: | 30MΩ, typical |
Operating temperature: | -10 to 40°C ( 14 to 104°F) | Zero adjustment range: | 0.02 to 8mV (0.2 to 8mV recommended) |
Overall dimensions: | 178×201×160mm (7.0 x 7.9 x 6.3 in) | Full scale input range: | ±3.125mV/V |